1 Make marking on cornices for corner joint.   2 Marked on the wall and ceiling using the cornices to prepare for corner joints.   3 Saw at the marked point of the cornice   4 Apply adhesive along the edges at the back of cornices as wall as to the mating surfaces for joints.   5 Using Pressure gun for nailing.   6 Adjust the joint for perfect match.   7 Ensure proper alignment on joints before nailing.   8 Apply filler to fill up gaps.   9 Use sand paper to smooth the surface.   10 Wipe off excess filler.   << Back
	Mithril Saferay Sdn. Bhd. All rights reserved.